Australia - New Zealand (ANZ)

Good Afternoon Colleagues,

In previous years our ANZ universities have collaborated with arranging
Oracle/PeopleSoft training around an Alliance Down Under during
pre-conference times, and thus leveraging from the visiting international
knowledge.

Is there any interest or established arrangement on procuring PeopleSoft
training for the November, 2015 period?


Kind Regards,

Rachel Daniels.

*Rachel Daniels | Applications Patching Team Leader*

*Enterprise Information Systems*

*Griffith University https://www.griffith.edu.au *
*| Nathan | QLD 4111 | Building location (N53) Room 2.62 T +61 7 3735 3842
| F +61 73735 4398** | E <http://goog_1942576257>r.daniels
<http://r.daniels>**@griffith.edu.au <r.daniels@griffith.edu.au>*

PRIVILEGED - PRIVATE AND CONFIDENTIAL This email and any files transmitted
with it are intended solely for the use of the addressee(s) and may contain
information which is confidential or privileged. If you receive this email
and you are not the addressee or responsible for delivery of the email to
the addressee(s), please disregard the contents of the email, delete the
mail and notify the author immediately.

Hi

ANU could be interested in attending technical training courses on Tuesday/Wednesday prior to the conference

Examples include

* PUM overview/usage

* PeopleTools 8.54/8.55 features - PeopleCode, work centres, fluid design

* Similar related courses

Please notify via the ANU list if these could be arranged

Stuart

--
============================================
Stuart Kendall
PeopleSoft Team Lead
Enterprise Systems
Information Technology Services
W.K. Hancock - West Wing (level 5)
43 Biology Place
The Australian National University
Acton ACT 2601 Australia

T: +61 2 6125 6781
F: +61 2 6125 0449
M: stuart.kendall@anu.edu.au<mailto:stuart.kendall@anu.edu.au>
W: http://itservices.anu.edu.au/

CRICOS Provider #00120C
============================================

Hi,

USC would also be very interesed in same areas raised by Stuart from ANU from the technical stream.

Thanks
Greg

Greg Heinl

Senior Business Systems Analyst

Information Technology Services

Ph: +61 7 5459 4592 | Email: gheinl@usc.edu.au | Web: www.usc.edu.au

Hi Stuart (and other interested parties)
Although I'm not able to confirm just yet, we are looking into a pre-conference PUM workshop. We are also working on a deep-dive session on FLUID spanning two sessions (again to be confirmed) - although I will be interested to hear from people if they would rather have a second pre-conference workshop instead of the deep-dive session.

We are hoping to have available sessions/workshops out to everyone shortly. I'm happy to receive feedback on any other areas that people would be interested in.

Regards,
Stephanie.

From: Stuart Kendall [mailto:anz.heug@list.heug.org]
Sent: Friday, 11 September 2015 3:28 PM
To: anz.heug@list.heug.org
Cc: Peter Ness
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi

ANU could be interested in attending technical training courses on Tuesday/Wednesday prior to the conference

Examples include

* PUM overview/usage

* PeopleTools 8.54/8.55 features - PeopleCode, work centres, fluid design

* Similar related courses

Please notify via the ANU list if these could be arranged

Stuart

--
============================================
Stuart Kendall
PeopleSoft Team Lead
Enterprise Systems
Information Technology Services
W.K. Hancock - West Wing (level 5)
43 Biology Place
The Australian National University
Acton ACT 2601 Australia

T: +61 2 6125 6781
F: +61 2 6125 0449
M: stuart.kendall@anu.edu.au<mailto:stuart.kendall@anu.edu.au>
W: http://itservices.anu.edu.au/

CRICOS Provider #00120C
============================================


-----End Original Message-----

I'd say that both sessions would be beneficial. Depending on the demand, a second pre-conference PUM Workshop would be good to place everyone in the same level of understand regarding PUMs. As I would say that's a priority.

Simultaneously, a deep-dive session on FLUID would be fully handy most especially to the crowd who have been very much keen to look into the GUI organizational improvements for better User portal experience.

Out of curiosity, are you only looking to schedule the workshops within Australia? Just asking to see if there are training course possibilities over here in New Zealand.

From: Stephanie-Anne Maritz [mailto:anz.heug@list.heug.org]
Sent: Monday, 14 September 2015 9:20 a.m.
To: anz.heug@list.heug.org
Cc: Peter Ness; Nikki Gaertner Eaton
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi Stuart (and other interested parties)
Although I'm not able to confirm just yet, we are looking into a pre-conference PUM workshop. We are also working on a deep-dive session on FLUID spanning two sessions (again to be confirmed) - although I will be interested to hear from people if they would rather have a second pre-conference workshop instead of the deep-dive session.

We are hoping to have available sessions/workshops out to everyone shortly. I'm happy to receive feedback on any other areas that people would be interested in.

Regards,
Stephanie.

From: Stuart Kendall [mailto:anz.heug@list.heug.org]
Sent: Friday, 11 September 2015 3:28 PM
To: anz.heug@list.heug.org<mailto:anz.heug@list.heug.org>
Cc: Peter Ness
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi

ANU could be interested in attending technical training courses on Tuesday/Wednesday prior to the conference

Examples include

* PUM overview/usage

* PeopleTools 8.54/8.55 features - PeopleCode, work centres, fluid design

* Similar related courses

Please notify via the ANU list if these could be arranged

Stuart

--
============================================
Stuart Kendall
PeopleSoft Team Lead
Enterprise Systems
Information Technology Services
W.K. Hancock - West Wing (level 5)
43 Biology Place
The Australian National University
Acton ACT 2601 Australia

T: +61 2 6125 6781
F: +61 2 6125 0449
M: stuart.kendall@anu.edu.au<mailto:stuart.kendall@anu.edu.au>
W: http://itservices.anu.edu.au/

CRICOS Provider #00120C
============================================


-----End Original Message-----

-----End Original Message-----

training course possibilities here in New Zealand would be well received


Don Shewan
General Manager
Procurement and Logistics
Unitec Institute of Technology
dshewan@unitec.ac.nz<mailto:dshewan@unitec.ac.nz>
Cell 021 628533
Tel +64 9 8154321 Ext 7774

Check this site for our supplier information
http://www.unitec.ac.nz/about-us/information-for-unitec-suppliers



From: Jowe Esguerra [mailto:anz.heug@list.heug.org]
Sent: Monday, 14 September 2015 9:38 a.m.
To: anz.heug@list.heug.org
Cc: Peter Ness; Nikki Gaertner Eaton
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

I'd say that both sessions would be beneficial. Depending on the demand, a second pre-conference PUM Workshop would be good to place everyone in the same level of understand regarding PUMs. As I would say that's a priority.

Simultaneously, a deep-dive session on FLUID would be fully handy most especially to the crowd who have been very much keen to look into the GUI organizational improvements for better User portal experience.

Out of curiosity, are you only looking to schedule the workshops within Australia? Just asking to see if there are training course possibilities over here in New Zealand.

From: Stephanie-Anne Maritz [mailto:anz.heug@list.heug.org]
Sent: Monday, 14 September 2015 9:20 a.m.
To: anz.heug@list.heug.org<mailto:anz.heug@list.heug.org>
Cc: Peter Ness; Nikki Gaertner Eaton
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi Stuart (and other interested parties)
Although I'm not able to confirm just yet, we are looking into a pre-conference PUM workshop. We are also working on a deep-dive session on FLUID spanning two sessions (again to be confirmed) - although I will be interested to hear from people if they would rather have a second pre-conference workshop instead of the deep-dive session.

We are hoping to have available sessions/workshops out to everyone shortly. I'm happy to receive feedback on any other areas that people would be interested in.

Regards,
Stephanie.

From: Stuart Kendall [mailto:anz.heug@list.heug.org]
Sent: Friday, 11 September 2015 3:28 PM
To: anz.heug@list.heug.org<mailto:anz.heug@list.heug.org>
Cc: Peter Ness
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi

ANU could be interested in attending technical training courses on Tuesday/Wednesday prior to the conference

Examples include

* PUM overview/usage

* PeopleTools 8.54/8.55 features - PeopleCode, work centres, fluid design

* Similar related courses

Please notify via the ANU list if these could be arranged

Stuart

--
============================================
Stuart Kendall
PeopleSoft Team Lead
Enterprise Systems
Information Technology Services
W.K. Hancock - West Wing (level 5)
43 Biology Place
The Australian National University
Acton ACT 2601 Australia

T: +61 2 6125 6781
F: +61 2 6125 0449
M: stuart.kendall@anu.edu.au<mailto:stuart.kendall@anu.edu.au>
W: http://itservices.anu.edu.au/

CRICOS Provider #00120C
============================================


-----End Original Message-----

-----End Original Message-----

-----End Original Message-----

Unitec Notice: This email, including any attachments, may contain information which is confidential or subject to legal privilege or copyright. If you are not the intended recipient of this email, you may not read, use, copy or disclose it or its attachments. If you are not the intended recipient please notify us immediately and then delete this email from your system.

I echo that, training in NZ would be great.

Kind regards,

Richard Corby
Business Applications Manager

Information Technology Services
L206 - 2nd floor George Forbes Memorial Library
P O Box 85084
Lincoln University
Lincoln 7647
Christchurch
New Zealand

p +64 3 423 0127 | m +64 022 096 9363
e richard.corby@lincoln.ac.nz<mailto:richard.corby@lincoln.ac.nz>| w www.lincoln.ac.nzhttp://www.lincoln.ac.nz

Lincoln University, Te Whare Wānaka o Aoraki
New Zealand's Specialist Land-Based University



From: Don Shewan [mailto:anz.heug@list.heug.org]
Sent: Monday, 14 September 2015 10:49 a.m.
To: anz.heug@list.heug.org
Cc: Peter Ness <peter.ness@anu.edu.au>; Nikki Gaertner Eaton <Nikki.Gaertner@unisa.edu.au>
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

training course possibilities here in New Zealand would be well received


Don Shewan
General Manager
Procurement and Logistics
Unitec Institute of Technology
dshewan@unitec.ac.nz<mailto:dshewan@unitec.ac.nz>
Cell 021 628533
Tel +64 9 8154321 Ext 7774

Check this site for our supplier information
http://www.unitec.ac.nz/about-us/information-for-unitec-suppliers



From: Jowe Esguerra [mailto:anz.heug@list.heug.org]
Sent: Monday, 14 September 2015 9:38 a.m.
To: anz.heug@list.heug.org<mailto:anz.heug@list.heug.org>
Cc: Peter Ness; Nikki Gaertner Eaton
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

I’d say that both sessions would be beneficial. Depending on the demand, a second pre-conference PUM Workshop would be good to place everyone in the same level of understand regarding PUMs. As I would say that’s a priority.

Simultaneously, a deep-dive session on FLUID would be fully handy most especially to the crowd who have been very much keen to look into the GUI organizational improvements for better User portal experience.

Out of curiosity, are you only looking to schedule the workshops within Australia? Just asking to see if there are training course possibilities over here in New Zealand.

From: Stephanie-Anne Maritz [mailto:anz.heug@list.heug.org]
Sent: Monday, 14 September 2015 9:20 a.m.
To: anz.heug@list.heug.org<mailto:anz.heug@list.heug.org>
Cc: Peter Ness; Nikki Gaertner Eaton
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi Stuart (and other interested parties)
Although I’m not able to confirm just yet, we are looking into a pre-conference PUM workshop. We are also working on a deep-dive session on FLUID spanning two sessions (again to be confirmed) – although I will be interested to hear from people if they would rather have a second pre-conference workshop instead of the deep-dive session.

We are hoping to have available sessions/workshops out to everyone shortly. I’m happy to receive feedback on any other areas that people would be interested in.

Regards,
Stephanie.

From: Stuart Kendall [mailto:anz.heug@list.heug.org]
Sent: Friday, 11 September 2015 3:28 PM
To: anz.heug@list.heug.org<mailto:anz.heug@list.heug.org>
Cc: Peter Ness
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi

ANU could be interested in attending technical training courses on Tuesday/Wednesday prior to the conference

Examples include

• PUM overview/usage

• PeopleTools 8.54/8.55 features – PeopleCode, work centres, fluid design

• Similar related courses

Please notify via the ANU list if these could be arranged

Stuart

--
============================================
Stuart Kendall
PeopleSoft Team Lead
Enterprise Systems
Information Technology Services
W.K. Hancock - West Wing (level 5)
43 Biology Place
The Australian National University
Acton ACT 2601 Australia

T: +61 2 6125 6781
F: +61 2 6125 0449
M: stuart.kendall@anu.edu.au<mailto:stuart.kendall@anu.edu.au>
W: http://itservices.anu.edu.au/

CRICOS Provider #00120C
============================================


-----End Original Message-----

-----End Original Message-----

-----End Original Message-----

Unitec Notice: This email, including any attachments, may contain information which is confidential or subject to legal privilege or copyright. If you are not the intended recipient of this email, you may not read, use, copy or disclose it or its attachments. If you are not the intended recipient please notify us immediately and then delete this email from your system.


-----End Original Message-----

________________________________
P Please consider the environment before you print this email.
"The contents of this e-mail (including any attachments) may be confidential and/or subject to copyright. Any unauthorised use, distribution, or copying of the contents is expressly prohibited. If you have received this e-mail in error, please advise the sender by return e-mail or telephone and then delete this e-mail together with all attachments from your system."

Hi
I agree, perhaps NZ Universities could confirm top requirements/needs to see what may be able to be set-up in NZ.

Ngā mihi nui

Vanessa Forrester

HR Specialist - Development
Human Resources ǀ Pūmanawa Tangata
University of Canterbury ǀ Te Whare Wānanga o Waitaha
Private Bag 4800
Christchurch 8140, New Zealand
P: +64 3 369 3257 ǀ Internal: 93257
M: +64 27 555 4503
E: mailto:vanessa.forrester@canterbury.ac.nz
Location: HR – DB06, Dovedale

FollowUC: [https://encrypted-tbn3.gstatic.com/images?q=tbn:ANd9GcR3jOn9i2eACYo_u1YalJaz5VmPte2iUzfMDytCXRCUQ-bRancL-Bm_jqsD] http://www.canterbury.ac.nz [cid:image001.png@01CFACBA.C4F85FA0] <https://www.facebook.com/universitycanterbury> [cid:image002.png@01CFACBA.C4F85FA0] <https://twitter.com/ucnz> [cid:image003.png@01CFACBA.C4F85FA0] <http://www.youtube.com/universitycanterbury> [http://emailmarketing.comm100.com/images/icon/icon_linkedin.gif] <http://www.linkedin.com/company/university-of-canterbury>




From: Corby, Richard [mailto:anz.heug@list.heug.org]
Sent: Monday, 14 September 2015 1:38 p.m.
To: anz.heug@list.heug.org
Cc: Peter Ness; Nikki Gaertner Eaton
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

I echo that, training in NZ would be great.

Kind regards,

Richard Corby
Business Applications Manager

Information Technology Services
L206 - 2nd floor George Forbes Memorial Library
P O Box 85084
Lincoln University
Lincoln 7647
Christchurch
New Zealand

p +64 3 423 0127 | m +64 022 096 9363
e richard.corby@lincoln.ac.nz<mailto:richard.corby@lincoln.ac.nz>| w www.lincoln.ac.nzhttp://www.lincoln.ac.nz

Lincoln University, Te Whare Wānaka o Aoraki
New Zealand's Specialist Land-Based University



From: Don Shewan [mailto:anz.heug@list.heug.org]
Sent: Monday, 14 September 2015 10:49 a.m.
To: anz.heug@list.heug.org<mailto:anz.heug@list.heug.org>
Cc: Peter Ness <peter.ness@anu.edu.au<mailto:peter.ness@anu.edu.au>>; Nikki Gaertner Eaton <Nikki.Gaertner@unisa.edu.au<mailto:Nikki.Gaertner@unisa.edu.au>>
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

training course possibilities here in New Zealand would be well received


Don Shewan
General Manager
Procurement and Logistics
Unitec Institute of Technology
dshewan@unitec.ac.nz<mailto:dshewan@unitec.ac.nz>
Cell 021 628533
Tel +64 9 8154321 Ext 7774

Check this site for our supplier information
http://www.unitec.ac.nz/about-us/information-for-unitec-suppliers



From: Jowe Esguerra [mailto:anz.heug@list.heug.org]
Sent: Monday, 14 September 2015 9:38 a.m.
To: anz.heug@list.heug.org<mailto:anz.heug@list.heug.org>
Cc: Peter Ness; Nikki Gaertner Eaton
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

I’d say that both sessions would be beneficial. Depending on the demand, a second pre-conference PUM Workshop would be good to place everyone in the same level of understand regarding PUMs. As I would say that’s a priority.

Simultaneously, a deep-dive session on FLUID would be fully handy most especially to the crowd who have been very much keen to look into the GUI organizational improvements for better User portal experience.

Out of curiosity, are you only looking to schedule the workshops within Australia? Just asking to see if there are training course possibilities over here in New Zealand.

From: Stephanie-Anne Maritz [mailto:anz.heug@list.heug.org]
Sent: Monday, 14 September 2015 9:20 a.m.
To: anz.heug@list.heug.org<mailto:anz.heug@list.heug.org>
Cc: Peter Ness; Nikki Gaertner Eaton
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi Stuart (and other interested parties)
Although I’m not able to confirm just yet, we are looking into a pre-conference PUM workshop. We are also working on a deep-dive session on FLUID spanning two sessions (again to be confirmed) – although I will be interested to hear from people if they would rather have a second pre-conference workshop instead of the deep-dive session.

We are hoping to have available sessions/workshops out to everyone shortly. I’m happy to receive feedback on any other areas that people would be interested in.

Regards,
Stephanie.

From: Stuart Kendall [mailto:anz.heug@list.heug.org]
Sent: Friday, 11 September 2015 3:28 PM
To: anz.heug@list.heug.org<mailto:anz.heug@list.heug.org>
Cc: Peter Ness
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi

ANU could be interested in attending technical training courses on Tuesday/Wednesday prior to the conference

Examples include

• PUM overview/usage

• PeopleTools 8.54/8.55 features – PeopleCode, work centres, fluid design

• Similar related courses

Please notify via the ANU list if these could be arranged

Stuart

--
============================================
Stuart Kendall
PeopleSoft Team Lead
Enterprise Systems
Information Technology Services
W.K. Hancock - West Wing (level 5)
43 Biology Place
The Australian National University
Acton ACT 2601 Australia

T: +61 2 6125 6781
F: +61 2 6125 0449
M: stuart.kendall@anu.edu.au<mailto:stuart.kendall@anu.edu.au>
W: http://itservices.anu.edu.au/

CRICOS Provider #00120C
============================================


-----End Original Message-----

-----End Original Message-----

-----End Original Message-----

Unitec Notice: This email, including any attachments, may contain information which is confidential or subject to legal privilege or copyright. If you are not the intended recipient of this email, you may not read, use, copy or disclose it or its attachments. If you are not the intended recipient please notify us immediately and then delete this email from your system.


-----End Original Message-----

________________________________
P Please consider the environment before you print this email.
"The contents of this e-mail (including any attachments) may be confidential and/or subject to copyright. Any unauthorised use, distribution, or copying of the contents is expressly prohibited. If you have received this e-mail in error, please advise the sender by return e-mail or telephone and then delete this e-mail together with all attachments from your system."

-----End Original Message-----

There is already an offering in NZ for the Fluid UI course … just prior to the ADU …


PeopleSoft Fluid User Interface Rel 8.54 02 - 03 Nov 15 Auckland


From: Mark Rosser [mailto:mark.rosser=asparona.com@mail71.atl11.rsgsv.net] On Behalf Of Mark Rosser
Sent: Thursday, 10 September 2015 12:12 p.m.

Subject: Oracle - course schedule to Christmas

Asparona Education's monthly Oracle University schedule update

View this email in your browser<http://us7.campaign-archive2.com/?u=638914b1cde0d470d48930b8e&id=b4ce8f6907&e=b7323b3021>



[https://gallery.mailchimp.com/638914b1cde0d470d48930b8e/images/cf937156-2e74-4285-84aa-fe3f6ca7f8c0.png]

[https://gallery.mailchimp.com/638914b1cde0d470d48930b8e/images/92b62d93-2804-4380-ae50-cc02bb944b3c.jpg]





Into the future...






With pause for just a little, but relevant humour...



[https://gallery.mailchimp.com/638914b1cde0d470d48930b8e/images/fd5ab0c8-9cb7-40c9-9010-d48d1e28f754.jpg]

-----End Original Message-----

Hi all,
University of Adelaide is interested in any Fluid related opportunities with the preference being Australian based.

Can anyone provide me with any information on what’s available or planned?

Thanks

Angus Hogben
Senior Application Specialist
Business Applications,
Application Services, Technology Services
UNIVERSITY OF ADELAIDE, AUSTRALIA 5005
Tel: +61 8 8313 0537
Fax: +61 8 8313 4400


From: Gary Tomlin [mailto:anz.heug@list.heug.org]
Sent: Tuesday, 15 September 2015 11:34 AM
To: anz.heug@list.heug.org
Cc: Peter Ness; Nikki Gaertner Eaton
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

There is already an offering in NZ for the Fluid UI course … just prior to the ADU …


PeopleSoft Fluid User Interface Rel 8.54 02 - 03 Nov 15 Auckland


From: Mark Rosser [mailto:mark.rosser=asparona.com@mail71.atl11.rsgsv.net] On Behalf Of Mark Rosser
Sent: Thursday, 10 September 2015 12:12 p.m.

Subject: Oracle - course schedule to Christmas

Asparona Education's monthly Oracle University schedule update

View this email in your browser<http://us7.campaign-archive2.com/?u=638914b1cde0d470d48930b8e&id=b4ce8f6907&e=b7323b3021>



[https://gallery.mailchimp.com/638914b1cde0d470d48930b8e/images/cf937156-2e74-4285-84aa-fe3f6ca7f8c0.png]

[https://gallery.mailchimp.com/638914b1cde0d470d48930b8e/images/92b62d93-2804-4380-ae50-cc02bb944b3c.jpg]





Into the future...






With pause for just a little, but relevant humour...



[https://gallery.mailchimp.com/638914b1cde0d470d48930b8e/images/fd5ab0c8-9cb7-40c9-9010-d48d1e28f754.jpg]

-----End Original Message-----

Hi All,

 

Same here, UQ would like Fluid pre-ADU training in Australia.

 

My understanding is that there’s nothing available yet but if there’s enough interest it could be possible to organise something.

 

Regards,

 

Mariela Pastelin
Senior Technical Analyst, Financial Systems
Finance & Business Services Division | The University of Queensland | QLD 4072 | Australia
t.  07 3365 1229 |  f.  07 3365 1511 |  e. uqmpaste@uq.edu.au | w. www.fbs.uq.edu.au

Hi Jowe.

Thank you for your feedback. As technical track co-chair for the HEUG ADU, organising training & sessions around the ADU conference is my only focus. Are you planning to send any delegates to this year's conference? If so - can I suggest that they have a chat to some of the training providers or Oracle about possible training in NZ?

Regards,
Stephanie.

From: Jowe Esguerra [mailto:anz.heug@list.heug.org]
Sent: Monday, 14 September 2015 7:38 AM
To: anz.heug@list.heug.org
Cc: Peter Ness; Nikki Gaertner Eaton
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

I'd say that both sessions would be beneficial. Depending on the demand, a second pre-conference PUM Workshop would be good to place everyone in the same level of understand regarding PUMs. As I would say that's a priority.

Simultaneously, a deep-dive session on FLUID would be fully handy most especially to the crowd who have been very much keen to look into the GUI organizational improvements for better User portal experience.

Out of curiosity, are you only looking to schedule the workshops within Australia? Just asking to see if there are training course possibilities over here in New Zealand.

From: Stephanie-Anne Maritz [mailto:anz.heug@list.heug.org]
Sent: Monday, 14 September 2015 9:20 a.m.
To: anz.heug@list.heug.org<mailto:anz.heug@list.heug.org>
Cc: Peter Ness; Nikki Gaertner Eaton
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi Stuart (and other interested parties)
Although I'm not able to confirm just yet, we are looking into a pre-conference PUM workshop. We are also working on a deep-dive session on FLUID spanning two sessions (again to be confirmed) - although I will be interested to hear from people if they would rather have a second pre-conference workshop instead of the deep-dive session.

We are hoping to have available sessions/workshops out to everyone shortly. I'm happy to receive feedback on any other areas that people would be interested in.

Regards,
Stephanie.

From: Stuart Kendall [mailto:anz.heug@list.heug.org]
Sent: Friday, 11 September 2015 3:28 PM
To: anz.heug@list.heug.org<mailto:anz.heug@list.heug.org>
Cc: Peter Ness
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi

ANU could be interested in attending technical training courses on Tuesday/Wednesday prior to the conference

Examples include

* PUM overview/usage

* PeopleTools 8.54/8.55 features - PeopleCode, work centres, fluid design

* Similar related courses

Please notify via the ANU list if these could be arranged

Stuart

--
============================================
Stuart Kendall
PeopleSoft Team Lead
Enterprise Systems
Information Technology Services
W.K. Hancock - West Wing (level 5)
43 Biology Place
The Australian National University
Acton ACT 2601 Australia

T: +61 2 6125 6781
F: +61 2 6125 0449
M: stuart.kendall@anu.edu.au<mailto:stuart.kendall@anu.edu.au>
W: http://itservices.anu.edu.au/

CRICOS Provider #00120C
============================================


-----End Original Message-----

-----End Original Message-----

-----End Original Message-----

Hi All

As a NZ rep on the SIG I am happy to collate a list of training interests on behalf of NZ to put forward for the next Mini HEUG in NZ.  Alternatively if you would like to discuss the Alliance Down Under conference I am happy to talk to you via the phone or email about this event.  You can email me directly at vhearn@unitec.ac.nz with your prefered contact details.  It would be fantastic to have some NZ collegues there.

 

It is worth providing any training interest to Stephanie as this may also interest others and we could look to see if it could be provided via a webinar or at a future point.

 

Thanks

Vic

Thank you for your information Stephanie-Anne,

Our top interests in training sessions at this stage are:
* PUM overview/usage
* PeopleTools 8.54

Kind Regards,

Rachel Daniels.

*Rachel Daniels | Applications Patching Team Leader*

*Enterprise Information Systems*

*Griffith University https://www.griffith.edu.au *
*| Nathan | QLD 4111 | Building location (N53) Room 2.62 T +61 7 3735 3842
| F +61 73735 4398** | E <http://goog_1942576257>r.daniels
<http://r.daniels>**@griffith.edu.au <r.daniels@griffith.edu.au>*

PRIVILEGED - PRIVATE AND CONFIDENTIAL This email and any files transmitted
with it are intended solely for the use of the addressee(s) and may contain
information which is confidential or privileged. If you receive this email
and you are not the addressee or responsible for delivery of the email to
the addressee(s), please disregard the contents of the email, delete the
mail and notify the author immediately.

On Mon, Sep 14, 2015 at 7:19 AM, Stephanie-Anne Maritz <
anz.heug@list.heug.org> wrote:

> Hi Stuart (and other interested parties)
>
> Although I’m not able to confirm just yet, we are looking into a
> pre-conference PUM workshop. We are also working on a deep-dive session on
> FLUID spanning two sessions (again to be confirmed) – although I will be
> interested to hear from people if they would rather have a second
> pre-conference workshop instead of the deep-dive session.
>
>
>
> We are hoping to have available sessions/workshops out to everyone
> shortly. I’m happy to receive feedback on any other areas that people
> would be interested in.
>
>
>
> Regards,
>
> Stephanie.
>
>
>
> *From:* Stuart Kendall [mailto:anz.heug@list.heug.org]
> *Sent:* Friday, 11 September 2015 3:28 PM
> *To:* anz.heug@list.heug.org
> *Cc:* Peter Ness
> *Subject:* [anz.heug] - RE: Alliance Down Under '15 Pre-Conference
> Training Course Possibilities
>
>
>
> Hi
>
>
>
> ANU could be interested in attending technical training courses on
> Tuesday/Wednesday prior to the conference
>
>
>
> Examples include
>
> · PUM overview/usage
>
> · PeopleTools 8.54/8.55 features – PeopleCode, work centres,
> fluid design
>
> · Similar related courses
>
>
>
> Please notify via the ANU list if these could be arranged
>
>
>
> Stuart
>
>
>
> --
>
> ============================================
>
> Stuart Kendall
>
> PeopleSoft Team Lead
>
> Enterprise Systems
>
> Information Technology Services
>
> W.K. Hancock - West Wing (level 5)
>
> 43 Biology Place
>
> The Australian National University
>
> Acton ACT 2601 Australia
>
>
>
> T: +61 2 6125 6781
>
> F: +61 2 6125 0449
>
> M: stuart.kendall@anu.edu.au
>
> W: http://itservices.anu.edu.au/
>
>
>
> CRICOS Provider #00120C
>
> ============================================
>
>
>
>
> -----End Original Message-----
>
> -----End Original Message-----
>

Hi,

USQ would definitely be interested in these topics as well (Fluid in particular)

Thanks

William

From: Stuart Kendall [mailto:anz.heug@list.heug.org]
Sent: Friday, 11 September 2015 3:28 PM
To: anz.heug@list.heug.org
Cc: Peter Ness
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi

ANU could be interested in attending technical training courses on Tuesday/Wednesday prior to the conference

Examples include

* PUM overview/usage

* PeopleTools 8.54/8.55 features - PeopleCode, work centres, fluid design

* Similar related courses

Please notify via the ANU list if these could be arranged

Stuart

--
============================================
Stuart Kendall
PeopleSoft Team Lead
Enterprise Systems
Information Technology Services
W.K. Hancock - West Wing (level 5)
43 Biology Place
The Australian National University
Acton ACT 2601 Australia

T: +61 2 6125 6781
F: +61 2 6125 0449
M: stuart.kendall@anu.edu.au<mailto:stuart.kendall@anu.edu.au>
W: http://itservices.anu.edu.au/

CRICOS Provider #00120C
============================================


-----End Original Message-----


_____________________________________________________________
This email (including any attached files) is confidential and is for the intended recipient(s) only. If you received this email by mistake, please, as a courtesy, tell the sender, then delete this email.

The views and opinions are the originator's and do not necessarily reflect those of the University of Southern Queensland. Although all reasonable precautions were taken to ensure that this email contained no viruses at the time it was sent we accept no liability for any losses arising from its receipt.

The University of Southern Queensland is a registered provider of education with the Australian Government.
(CRICOS Institution Code QLD 00244B / NSW 02225M, TEQSA PRV12081 )

Good morning all,

UniSA are in the final stages of implementing Fluid and WorkCentre's (as well as EMS, Rules Engine and using the Research tracking modules)- we have submitted presentations in both the technical and student tracks to go through what we've done.

Kind regards
Sarah

Sarah Kemp: Business Analyst
Information Systems and Technology Services: Research Administration in Medici (RAM) Project
University of South Australia

t: +61 8 830 25052| ipc: MLK-25
p: PO Box 2471 Adelaide, South Australia 5001

CRICOS provider number: 00121B



From: William Clarke [mailto:anz.heug@list.heug.org]
Sent: Monday, 14 September 2015 7:30 AM
To: anz.heug@list.heug.org
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi,

USQ would definitely be interested in these topics as well (Fluid in particular)

Thanks

William

From: Stuart Kendall [mailto:anz.heug@list.heug.org]
Sent: Friday, 11 September 2015 3:28 PM
To: anz.heug@list.heug.org<mailto:anz.heug@list.heug.org>
Cc: Peter Ness
Subject: [anz.heug] - RE: Alliance Down Under '15 Pre-Conference Training Course Possibilities

Hi

ANU could be interested in attending technical training courses on Tuesday/Wednesday prior to the conference

Examples include

* PUM overview/usage

* PeopleTools 8.54/8.55 features - PeopleCode, work centres, fluid design

* Similar related courses

Please notify via the ANU list if these could be arranged

Stuart

--
============================================
Stuart Kendall
PeopleSoft Team Lead
Enterprise Systems
Information Technology Services
W.K. Hancock - West Wing (level 5)
43 Biology Place
The Australian National University
Acton ACT 2601 Australia

T: +61 2 6125 6781
F: +61 2 6125 0449
M: stuart.kendall@anu.edu.au<mailto:stuart.kendall@anu.edu.au>
W: http://itservices.anu.edu.au/

CRICOS Provider #00120C
============================================


-----End Original Message-----



-----End Original Message-----